Naar hoofdinhoud gaan

Documentation Index

Fetch the complete documentation index at: https://doc.sensolus.com/llms.txt

Use this file to discover all available pages before exploring further.

Description: ZA 3510 Installation manual EN
Access level: end-user
Reference: SDOC-498608282-1042
Download: PDF
www.sensolus.com | info@sensolus.com October 24, 2024 9:58 AM Installation and activation manual ZA 3510 Put the cable onto the connector. Only the black plastic piece will go into the connector. Do not force this Tighten the connection by gently screwing the cable into the connector. Do not force this as well. Guidelines for mounting the tracker can be found in the Sensolus documentation center. Installing the the zone anchor Activation of the zone anchor Hold a magnet for about 5 seconds on top of the logo on the zone anchor. You will first see a red LED. Do not remove the magnet yet. When the green LED is blinking you can remove the magnet. The zone anchor is ready for use. Attach the zone anchor on the wall Power the zone anchor. Plug into the netpower Activation of the zone anchors is preferably done with clear skies, and not inside (e.g. factory or warehouse). Zone anchors are not activated when delivered to your premises. Their subscription in the platform will start within six month of purchase. Check if the power cable is connected well. The zone anchor can operate independently on its internal battery or you can connect the zone anchor to the standard electrical network using a power cable and adapter. If you use the internal battery you can skip this.www.sensolus.com | info@sensolus.com October 24, 2024 9:58 AM General installation advice Avoid blocking the tracker’s view with thick metal or carbonfibre walls. They weaken or block the radiofrequency signals. Install the tracker vertically, with the logo facing up. Place the tracker around 3 meter
high on a wall to ensure scanning coverage. Concrete has an impact on the range of Bluetooth signals. Water absorbs the Bluetooth signals, Large amounts of water will impact the range and detectability of the zone anchor Place the tracker around 3 meter
high on a wall to ensure scanning coverage. Concrete Water Metal Conditions and surrounding materials Anchor placement for zone detection
www.sensolus.com | info@sensolus.com October 24, 2024 9:58 AM Troubleshooting the zone anchor
  1. Put the magnet on the zone anchor for less than 5 seconds
  2. The possible LED feedback options are: Red LED: Zone anchor is not activated Green LED: Zone anchor is activated and working properly No LED: Zone anchor is not functioning (probably dead battery -> contact support) Red LED is blinking: Zone anchor is busy Force new configuration download on the zone anchor Hold a magnet for about 5 seconds on top of the logo on the zone anchor. You will see a green LED. You will see a red and green LED. Now remove the Magnet Green LED is blinking for minimum 30 seconds. Checking for new configurations You see a green LED: New configuration setting received You see a red LED: No new  configuration received. A firmware can be uploaded on the zone anchor. Queue the firmware in the Sensolus platform first.
Description: End-of-life notification for the TRACK 1210 and ZA 3510
Access level: partner
Reference: SDOC-498608282-1318
Download: PDF
Ghent, 12/dec, 2025 Dear Partner, Valued Customer,This letter is the official notification that the following products will be discontinued as detailed below:Product types:
TRACK 1210 Vehicle tracker with external power option (NB-IOT only) ZA 3510
Zone Anchor with external power option (NB-IOT only)
Reason / background: End-of-Life of the product has been decided by product management. They are replaced by the NB-IOT/LTE-M combo products (see below).Replacement products: TRACK 1215 Vehicle tracker with external power option (NB-IOT/LTE-M) ZA 3515
Zone Anchor with external power option (NB-IOT/LTE-M)
Thank you for reviewing the above information. Should you have any questions, please contact the Sensolus representative in your area.Johan Criel
CTO and Product Lead at Sensolus
Description:
Access level: public
Reference: SDOC-498608282-1554
Download: PDF
ZA 3510 Zone-anker - batterij- of netstroom gevoed - NB-IoT EU & VS (zonder stroomadapter) www.sensolus.com | info@sensolus.com Het extern gevoede zone-anker met back-upbatterij voor de lokalisering van assets uitgerust met Bluetooth-tag trackers in een afgebakende zone. Het zone-anker scant continu wanneer het op netstroom werkt. Geïnstalleerd op een vaste locatie Scant Bluetooth Low Energy tag trackers NB-IoT Europa en Noord-Amerika Back-upbatterij IP67 Brandvertragend IK 09 Netstroom gevoed 130×72×36 mm 212g Connectiviteit NB-IoT • Energiezuinige zendontvanger • Interne omnidirectionele antenne • Bidirectionele communicatie • NB-IoT-banden: Europa/Noord-Amerika • Gegevensherstel • OTA firmware-update (NB-IoT) Bluetooth Low Energy (BLE) • Bluetooth Low Energy 5.0 • Draadloze firmware-update (BLE) Activering en montage • Activeringshandleiding • Gaten 7x9mm (⁹/₃₂ * ²³/₆₄ in) voor schroeven of klinknagels. 115 mm (4¹⁷/₃₂ in) afstand tussen de centra van de montagegaten. • Instructies voor de montage van het apparaat zijn beschikbaar in het Sensolus documentatiecentrum.ZA 3510 Zone-anker - batterij- of netstroom gevoed - NB-IoT EU & VS (zonder stroomadapter) www.sensolus.com | info@sensolus.com Mechanica & Design Antennes Alle antennes zijn intern Water- en stofweerstand IP67 Afmetingen 130x72x36 mm (5⅛ x 2⁵³⁄₆₄ x 1²⁷⁄₆₄ in) Slagvastheid IK09 Gewicht 218 gram (7,68 oz) Valschok en trillingen EN 60068 Kleur Wit Bedrijfstemperatuur -20°C tot 60°C (-4°F tot 140°F)* De specificaties met betrekking tot de bedrijfstemperatuur zijn afhankelijk van de toepassing, de installatieomstandigheden en omgevingsfactoren zoals blootstelling aan zonlicht. Neem voor meer informatie contact op met Sensolus. De batterijlevensduur kan worden beïnvloed wanneer apparaten gedurende langere perioden op de uiterste waarden van dit bereik worden gebruikt. Behuizing • PBT/PC 29 TM-Z2 FR UV LS • Brandvertragend • UV-gestabiliseerd Stroomvoorziening • 220-230 V Europa • 110-115 V Noord-Amerika • Voedingskabellengte 2 meter • AES-versleutelde firmware • Firmware-update staat alleen ondertekende firmware-images toe Back-upbatterij Levensduur back-upbatterij tijdens scannen Gebruik de Sensolus-batterijcalculator om de levensduur van de back-upbatterij te beoordelen, die varieert op basis van het specifieke gebruiksscenario. Kenmerken back-upbatterij • Door gebruiker vervangbaar batterijpak (Li-SoCl2) 12.000 mAh • 2,94 gram (0,1037 oz) lithium Certificeringen Regelgevend • CE • FCC • IC Bluetooth 5.0 Declaratie-ID D068598 Omgeving IK9 Elektrische veiligheid EN 62368-1ZA 3510 Zone-anker - batterij- of netstroom gevoed - NB-IoT EU & VS (zonder stroomadapter) www.sensolus.com | info@sensolus.com Gebruikersinteractie Apparaatactivering Magnetische activering LED-terugkoppeling Groene en rode LED-terugkoppeling op het apparaat Externe instellingen synchroniseren • Direct: Magnetische activering • Periodiek: Geen gebruikersinteractie vereist Beheerservices Diagnostiek • Voorspelling batterijlevensduur • Gedetailleerd energieverbruik • Geolocatiediagnostiek • Installatie • Communicatiekwaliteit Beheer • OTA firmware-updates via NB-IoT en BLE • Externe configuratie • Lokalisering zone-anker met Sensolus smartphone-app Toepassingsservices • Scannen van Bluetooth-tag trackers • Functioneert als beheerde geobeacon Tag tracking scannen • Scannen van Bluetooth-tag trackers • Functioneert als beheerde geobeacon Neem contact op met Sensolus wanneer meer dan 2.000 Bluetooth-tag trackers tegelijk gescand moeten worden Firmware-configuratie Scanconfiguraties voor Bluetooth-tag trackers • Scan- en verzendinterval • RSSI-scandrempel van de Bluetooth-tag tracker • Gescande Bluetooth-tag trackers filteren op UUID Gebruiken als geobeacon Ingeschakeld of uitgeschakeld Beveiliging • Apparaatspecifieke versleutelingssleutels • End-to-end payload-versleuteling Chacha 20 • AES-versleutelde firmware • Firmware-update staat alleen ondertekende firmware-images toe Accessoires De ZA 3510 wordt geleverd zonder stroomadapter. Sensolus heeft stroomadapters voor EU, VK en VS. • ADPT 8500 EU - ZA 3510 netstroom adapter EU-versie • ADPT 8501 UK - ZA 3510 netstroom adapter VK-versie • ADPT 8502 US - ZA 3510 netstroom adapter VS-versie
Description: Power adaptor Europe
Access level: public
Reference: SDOC-498608282-1058
Download: PDF
October 24, 2025 11:06 AM www.sensolus.com | info@sensolus.com Net power adaptor EU version ADPT 8500 EU 100 - 240 V 50/60 Hz Power input Voltage Frequency Power adapter featuring a power plug designed for use in mainland Europe, complete with a 2-meter long cable. IP 67 connector to ZA 3510 Europe Certifications 0,18 A Current CE Europe Mechanics & design Size 55.1 x 24.1 x 35.5 mm Color White wall-mount, 2 pin, EU Input plug 0°C to 50°C Operating temperature 0,1 W No load power consumption Yes RoHS Cable · UL 2464, 24 AWG · 2 meter long Plug 4 pins with screwable M5 connector
Description: Power adaptor USA
Access level: public
Reference: SDOC-498608282-1060
Download: PDF
October 24, 2025 11:06 AM www.sensolus.com | info@sensolus.com 100 - 240 V 50/60 Hz Power input Voltage Frequency Power adapter featuring a power plug designed for use in the USA, complete with a 2-meter long cable. IP 67 connector to ZA 3510 USA Certifications 0,18 A Current FCC part 15: Class B for radiated and conducted emissions USA Mechanics & design Size 55.1 x 24.1 x 35.5 mm Color White wall-mount, 2 pin, US Input plug 0°C to 50°C Operating temperature 0,1 W No load power consumption Net power adaptor USA version ADPT 8502 USA Yes RoHS Cable · UL 2464, 24 AWG · 2 meter long Plug 4 pins with screwable M5 connector
Description: Power adapter UK
Access level: public
Reference: SDOC-498608282-1077
Download: PDF
October 24, 2025 11:06 AM www.sensolus.com | info@sensolus.com Net power adaptor EU version ADPT 8501 UK 100 - 240 V 50/60 Hz Power input Voltage Frequency Power adaptor featuring a power plug designed for use in UK, complete with a 2-meter long cable. IP 67 connector to ZA 3510 UK Certifications 0,18 A Current CE Europe Mechanics & design Size 55.10 x 49.50 x 42.49 mm Color White wall-mount, UK Input plug 0°C to 50°C Operating temperature 0,1 W No load power consumption Yes RoHS Cable · UL 2464, 24 AWG · 2 meter long Plug 4 pins with screwable M5 connector
Zie de installatie-instructies. Voedingsadapters: