Skip to main content
MNT MAG 8110 Magnet mounting kit: The MNT MAG 8110 is a magnet mounting kit designed for TRACK 1000 and TRACK 1100 trackers. This kit provides a secure magnetic mounting solution for metal surfaces. Compatible devices The MNT MAG 8110 is compatible with the following tracker models: - TRACK 1000 - TRACK 1100 Kit contents The kit includes: - 2x M6 x 16 bolts - 2x magnets with internal thread - 2x washers Installation steps Step 1: Place the tracker on the magnets Place the tracker on top of the magnets. Make sure the metal protection on the magnets is facing up. Step 2: Line the washers Line the washers on top of the tracker's mounting holes. Step 3: Tighten the screws Tighten the screws on the magnets to secure the tracker in place. After installation, verify that the tracker is securely mounted and the magnets are firmly attached to the metal surface. Installation checklist Before completing the installation, verify the following: - [ ] All kit components are present (2 bolts, 2 magnets, 2 washers) - [ ] Metal protection on magnets is facing up - [ ] Washers are properly positioned on mounting holes - [ ] Screws are tightened securely - [ ] Tracker is firmly mounted and stable - [ ] Magnets are securely attached to the metal surface sensolus-internal 600px 400px 400px 400px MNT MAG 8110 Magnet mounting kit MNT MAG 8110 kit contents Place tracker on magnets Line washers on mounting holes Tighten screws