Skip to main content
Optimal installation of a tracker on an asset is very important for the optimal working of the tracking solution. Good installation prolongs the battery lifetime of the tracker, good installation transmits information from the tracker faster to the Sensolus platform, good installation gives more accurate location information,…
Description:
Access level: public
Reference: SDOC-498608282-1381
Download: PDF
Installation advice for sea containers www.sensolus.com | info@sensolus.com February 2025 Tracker installation Make sure the tracker is not fully surrounded by metal parts, as this blocks the signal. Protect the tracker by using the cooler unit's shape if possible. Place the tracker as high as possible on the asset. Ensure the tracker has a clear view of the sky. Do's Don'ts Install the tracker as high as possible On moving parts (lids, doors) Vertical installation if possible Close to forklift pick up holes Clear view on the sky Under the stillage (bad signal) Use asset’s cavaties to install the tracker On the very outside where the tracker might get hit by other equipment Install between metal ribs Do not install the tracker inside the containerInstallation advice for sea containers www.sensolus.com | info@sensolus.com February 2025 Safety advice – device subjected to strong mechanical impact Risk of delayed battery failure and chemical hazard If a device has been hit, crushed, or struck by a heavy object (for example a forklift, container, pallet, or falling load), the internal components and battery may be damaged even if no external damage is visible. Such damage can result in delayed overheating, leakage, or failure. If a device has been subjected to a strong mechanical impact, the following mandatory safety actions must be taken: # Action Details 1 Do not touch the device Do not move, lift, open, shake, or inspect the device immediately after the impact. Internal damage may cause delayed reactions. 2 Keep a minimum safety distance Maintain a clear distance of at least 5 meters from the device. Keep all personnel away during this period. 3 Wait at least 10 minutes The device must remain untouched and undisturbed for a minimum of 10 minutes following the impact. This waiting time allows potential delayed thermal or chemical reactions to become evident. 4 Observe from a safe distance Watch for warning signs: smoke, vapor, or unusual odor; heat generation; fluid leakage; hissing, cracking, or popping noises. 5 After the waiting period If any abnormal condition is observed, isolate the area immediately and notify responsible safety or supervisory personnel. The device must be quarantined and handled according to battery safety and disposal procedures. The device must not be used. A device may appear undamaged and still be unsafe. Normal operation after impact does NOT mean the device is safe. Failure to follow this safety advice may result in serious injury, fire, or chemical exposure.